Scientific and technical journal

«Automation and Informatization of the fuel and energy complex»

ISSN 0132-2222

IMPROVEMENT OF THE STATE PRIMARY SPECIAL STANDARD OF THE MASS FLOW-RATE UNIT OF GAS-LIQUID MIXTURES GET 195-2011

UDC: 620.113+681.121.8
DOI: 10.33285/0132-2222-2021-3(572)-55-58

Authors:

KUDUSOV DAMIR ISAVILIEVICH 1,
MALYSHEV SERGEY LVOVICH 1

1 D.I. Mendeleyev Institute for Metrology, Kazan, Russian Federation

Keywords: reproduction, unit of measurement, comparison, improvement, verification scheme, standard

Annotation:

The Order of the Federal Agency for Technical Regulation and Metrology (Rosstandart) № 251 of April 20, 2012, approved the State Primary Special Standard for the Unit of Mass Flow of Gas - Liquid Mixtures GET 195-2011 (hereinafter referred to as the primary standard). Implementation of the primary standard and adoption of GOST 8.637-2013 "GSI. The State verification scheme for measuring instruments of multiphase flows" contributed to ensuring the uniformity of measurements in the strategically important for Russia branch of hydrocarbons production. Over the past less than 10 years of operation, the primary standard reproduced, stored and transmitted the unit of measurement according to the State Verification Scheme for measuring the mass flow of multiphase flows to working standards of the 1st category using comparators, standards of the 2nd category and working measuring instruments - multiphase flow meters (MFM) and measuring installations by direct comparisons. With the help of the primary standard, tests were carried out to approve the type of several dozen of MFM produced by various foreign companies - Vx, Roxar, Wetherford, Petro Fiorentini, Shlumberger, Agar, Net Oil & Gas, including Russian-made VARPRO-ULTRAFLOW and many different separation measuring units. With the appearance of Russian manufacturers with their own working standards for gas-liquid mixtures, which sometimes exceed the ranges of flow reproduction by the primary standard by an order of magnitude, there is a need for improvement. This paper considers the main technical solutions used when developing an the improved primary standard.

Bibliography:

1. ГОСТ 8.637-2013. ГСИ. Государственная поверочная схема для средств измерений массового расхода многофазных потоков. - Введ. 2015-07-01. - М.: Стандартинформ, 2019. - III, 6 с.
2. Разработка и создание государственного первичного специального эталона единицы массового расхода газожидкостных смесей ГЭТ 195-2011 / В.Г. Соловьёв, В.Л. Варсегов, С.Л. Малышев, В.Н. Петров // Вестн. Казанского гос. техн. ун-та им. А.Н. Туполева. - 2013. - № 3. - С. 32-38.
3. Автоматизированный измерительный комплекс государственного первичного специального эталона массового расхода газожидкостной смеси ГЭТ 195-2011 / В.Н. Петров, К.А. Левин, Ю.Ф. Гортышов, Ю.К. Евдокимов // Вестн. Казанского гос. техн. ун-та им. А.Н. Туполева. - 2019. - Т. 75, № 3. - С. 144-148.
4. Пат. на полез. модель 197548 Рос. Федерация, МПК B01D 45/12. Сепаратор для газожидкостной смеси с высокой удельной плотностью потока / Н.И. Михеев, Д.В. Кратиров, В.А. Фафурин [и др.]; патентообладатели ООО НПП "Ирвис", ФГУП "ВНИИР", ФГБУН "Федер. исслед. центр "Казанский НЦ РАН". - № 2019132600; заявл. 14.10.2019; опубл. 13.05.2020, Бюл. № 14.
5. Пат. 2729239 Рос. Федерация, МПК B01D 45/12, B04C 3/00. Вихревой сепаратор сжатого газа / Н.И. Михеев, Д.В. Кратиров, В.А. Фафурин [и др.]; патентообладатели ООО НПП "Ирвис", ФГУП "ВНИИР", ФГБУН "Федер. исслед. центр "Казанский НЦ РАН". - № 2019132537; заявл. 14.10.2019; опубл. 05.08.2020, Бюл. № 22.
6. Пат. 200842 Рос. Федерация, МПК G01F 25/00. Устройство воспроизведения расходов газожидкостных потоков / Д.И. Кудусов, Д.В. Кратиров, Н.И. Михеев, В.А. Фафурин; патентообладатель ФГУП "ВНИИР". - № 2019132025; заявл. 09.10.2019; опубл. 13.11.2020, Бюл. № 32.