Application of tribodiagnostics methods for monitoring condition of bearings of GPA centrifugal compressor
UDC: 620.193/197:622.692.4
DOI: 10.33285/2073-9028-2023-2(311)-118-127
Authors:
ELAGINA OKSANA YU.1,
NAKONECHNAYA KSENIA V.1
1 National University of Oil and Gas “Gubkin University”, Moscow, Russian Federation
Keywords: tribodiagnostics, lubricants, friction units, compressor, mechanical impurities
Annotation:
The article is devoted to tribodiagnostic methods for monitoring the condition of equipment, in particular centrifugal compressor bearings. Control methods were analyzed and subsequently divided into two groups. Tp-22S oil in different cycles of operation of the GPA centrifugal compressor was studied. The results of the performed studies showed the relevance of the possibility of using tribodiagnostics methods for monitoring the state.
Bibliography:
1. Lopatin A.S. Sovershenstvovanie sistemy podgotovki vysokokvalificirovannyh kadrov v oblasti diagnostiki gazotransportnyh sistem//Oborudovanie i tehnologii dlja neftegazovogo kompleksa. – 2020. – № 1 (115). – S. 85–89.
2. Evdokimov A.Ju., Fuks I.G., Shabalina T.P. Smazochnye materialy i problemy jekologii. – M.: GUP “Izdatel’stvo “Neft’ i gaz” RGU nefti i gaza im. I.M. Gubkina”, 2000. – 424 s.
3. Docenko A.I., Bujanovskij I.A. Osnovy tribotehniki: uchebnik. – M.: INFRA-M, 2019. – 335 s.
4. Kozachenko A.N. Jekspluatacija kompressornyh stancij magistral’nyh gazoprovodov. – M.: Neft’ i gaz, 1999. – 463 s.
5. GOST 33305-2015. Masla smazochnye. Metod opredelenija fosfora, sery, kal’cija i cinka jenergodispersionnoj rentgenofluorescentnoj spektroskopiej. – M.: Standartinform, 2015. – 8 c.
6. GOST 33252-2015. Mezhgosudarstvennyj standart materialy smazochnye. Opredelenie kojefficienta trenija, iznosoustojchivosti i protivozadirnyh harakteristik na ispytatel'noj mashine SRV. – M.: Standartinform, 2015. – 19 c.
7. GOST 9490-75. Gruppa B09. Mezhgosudarstvennyj standart. Materialy smazochnye zhidkie i plastichnye. Metod opredelenija tribologicheskih harakteristik na chetyrehsharikovoj mashine. – M.: IPK “Izdatel’stvo standartov”, 1987. – 8 c.