Scientific and technical journal

«Automation and Informatization of the fuel and energy complex»

ISSN 0132-2222

Automation and Informatization of the fuel and energy complex
Determination of the deflection of the perforiator segmental lining charge during perforation-explosive works in oil wells to provide the maximum depth of penetration by cumulation process simulation

UDC: 004.94
DOI: 10.33285/2782-604X-2023-4(597)-27-33

Authors:

MUKHUTDINOV AGLYAM R.1,
EFIMOV MAXIM G.1,
VAKHIDOVA ZULFIYA R.2

1 Kazan National Research Technological University, Kazan, Russia
2 "TISBY" University of Management, Kazan, Russia

Keywords: computer simulation, cumulative charge with segmental lining, penetration depth, deflection of copper lining

Annotation:

The article, using modern information technologies (ANSYS AUTODYN application software), presents the developed methodology for creating a computer model for accurate determination of the penetrating action of the perforator cumulative charge made of a high-power mixed energy-saturated material with a segmented lining according to the penetration depth in a steel barrier, used during perforation-explosive works in oil wells. A virtual experiment was carried out with a model of a perforator cumulative charge to study the explosion directional effect. With the help of computational experiments, the influence of the lining deflection on the penetration depth was established. The optimal deflection of the segmental lining of the perforator cumulative charge was determined to be 0,44 to ensure the maximum penetration depth. A comparative study of the results of computer simulation and full-scale experiment of cumulative charges penetrating ability is presented.

Bibliography:

1. Popov V.V. Prostrelochno-vzryvnye raboty v skvazhinakh: ucheb. posobie. – Novocherkassk: YuRGTU, 2006. – 212 s.
2. Kumulyatsiya i ee ispol'zovanie vo vzryvnoy tekhnike: ucheb. posobie / V.G. Khotin, I.I. Tomasheevich, M.T. Ngunen, V.A. Ustimenko. – M.: RKhTU im. D.I. Mendeleeva, 2007. – 87 s.
3. Fedorov S.V., Ladov S.V., Nikol'skaya Ya.M. Sravnitel'nyy analiz formirovaniya kumulyativnykh struy iz konicheskikh i polusfericheskikh oblitsovok // Inzhenernyy zhurn.: nauka i innovatsii. – 2018. – № 1(73). – S. 6. – DOI: 10.18698/2308-6033-2018-1-1720
4. Fizika vzryva: v 2 t. T. 2. – Izd. 3-e, ispr. / S.G. Andreev, A.V. Babkin, F.A. Baum [i dr.]; pod. red. L.P. Orlenko. – M.: Fizmatlit, 2004. – 656 s.
5. Kolpakov V.I. Matematicheskoe modelirovanie funktsionirovaniya vzryvnykh ustroystv // Nauka i obrazovanie: nauch. izd. MGTU im. N.E. Baumana. – 2012. – № 2. – S. 31.
6. Komp'yuternye tekhnologii v inzhenernom dele. – URL: http://www.delcam-ural.ru/delkam_ural/cae/konstruktsionnyy_analiz_ansys/yavnaya_dinamika/ansys_autodyn/
7. Komp'yuternye tekhnologii v inzhenernom dele. – URL: http://www.delcam-ural.ru/cae/ansys
8. ANSYS AUTODYN. – URL: https://cae-expert.ru/product/ansys-autodyn
9. Mukhutdinov A.R., Efimov M.G. Osnovy primeneniya ANSYS Autodyn dlya resheniya zadach modelirovaniya bystroprotekayushchikh protsessov: ucheb. posobie. – Kazan': KNITU, 2016. – 244 s.
10. Mukhutdinov A.R., Efimov M.G., Aleksandrov V.N. Komp'yuternoe modelirovanie gazokumulyativnogo effekta // Vestn. tekhnolog. un-ta. – 2019. – T. 22, № 4. – S. 180–183.
11. Mukhutdinov A.R., Efimov M.G., Vakhidova Z.R. Chislennoe modelirovanie protsessa kumulyatsii zaryadov s segmentnymi oblitsovkami s primeneniem paketa ANSYS Autodyn // Nelineynyy mir. – 2020. – T. 18, № 4. – S. 34–40. – DOI: 10.18127/j20700970-202004-04
12. Komp'yuternoe modelirovanie protsessa kumulyatsii zaryadov ballistitnogo topliva / A.R. Mukhutdinov, R.Sh. Garifullin, M.G. Efimov, V.N. Aleksandrov // Vzryvnoe delo. – 2020. – № 126-83. – S. 198–206.
13. Komp'yuternoe modelirovanie protsessa kumulyatsii zaryadov s segmentnymi oblitsovkami v ANSYS AUTODYN / A.R. Mukhutdinov, M.G. Efimov, R.Sh. Garifulin, V.N. Aleksandrov // Vzryvnoe delo. – 2021. – № 133-90. – S. 87–99.
14. Mukhutdinov A.R., Efimov M.G., Vakhidova Z.R. Modelirovanie protsessa kumulyatsii zaryadov perforatorov pri prostrelochno-vzryvnykh rabotakh v skvazhinakh // Avtomatizatsiya i informatizatsiya TEK. – 2022. – № 4(585). – S. 20–24. – DOI: 10.33285/2782-604X-2022-4(585)-20-24
15. Mukhutdinov A.R., Vakhidova Z.R., Efimov M.G. Modelirovanie protsessa kumulyatsii // Nelineynyy mir. – 2022. – T. 20, № 3. – S. 35–41. – DOI: 10.18127/j20700970-202203-04
16. Kratkie svedeniya ob osnovnykh vzryvchatykh veshchestvakh. – URL: http://www.mining-portal.ru/library/char_bombs/about_bombs/
17. GOST 380-71. Stal' uglerodistaya obyknovennogo kachestva. Marki i obshchie tekhnicheskie trebovaniya. – Vved. 1972–01–01. – M.: Gosstandart SSSR, 1971. – 12 s.