«Automation and Informatization of the fuel and energy complex»

Methodology for automation of reservoir capacity determination in the Russian Federation

UDC: 681.5:622.276
DOI: -

Authors:

¹ Shukhov Belgorod State Technological University, Belgorod, Russia

Keywords: GOST, verification method, tank, technical device, uncertainty, measurement method error, measuring system for accounting for the main parameters of a tank capacity

Annotation:

This article reveals the features of automatic accounting of the main parameters of tanks capacity that are operated at oil bases. The main models for determining tanks capacity are analyzed. The most economically important types of tanks are identified from the point of view of logistics and quality control of petroleum products. Problems with the calculation of the "dead cavity" of tanks and its effect on the final result of determining tanks capacity are described. Particular attention is paid to the methods of determining the capacity of tanks by a relatively new method, an electron-optical one, that is, using 3D-scanner, a topological-geodetic technical device (in some cases, an approved type of the measuring device) as the main means of measurement. It is caused by the fact that in the professional environment of specialists engaged in tanks parameters measurement, there are many disputes about the accuracy characteristics of the 3D scanner itself and the error of the measurement method relative to the error of the tank itself. In conclusion the attention is focused on the relevance of using the uncertainty calculation when performing operations to determine the capacity of tanks for petroleum products storage.

Bibliography:

1. Ob obespechenii edinstva izmereniy: Feder. zakon ot 26.06.2008 g. № 102-FZ. – URL: https://www.consultant.ru/document/cons_doc_LAW_77904/
2. Ob utverzhdenii trebovaniy k soderzhaniyu i postroeniyu gosudarstvennykh poverochnykh skhem i lokal'nykh poverochnykh skhem, v tom chisle k ikh razrabotke, utverzhdeniyu i izmeneniyu … : prikaz M-va prom-sti i torgovli Rossiyskoy Federatsii ot 11.02.2020 № 456. – URL: https://minjust.consultant.ru/documents/46963
3. GOST 31385-2016. Mezhgosudarstvennyy standart. Rezervuary vertikal'nye tsilindricheskie stal'nye dlya nefti i nefteproduktov. Obshchie tekhnicheskie usloviya. – Vved. 2017–03–01. – M.: Standartinform, 2016. – IV, 91 s.
4. GOST R 8.996-2020. Natsional'nyy standart Rossiyskoy Federatsii. Gosudarstvennaya sistema obespecheniya edinstva izmereniy. Rezervuary stal'nye vertikal'nye tsilindricheskie. Metodika kalibrovki elektronno-opticheskim metodom. – Vved. 2021–02–01. – M.: Standartinform, 2021. – IV, 90 s.
5. GOST 8.570-2000. Mezhgosudarstvennyy standart. Gosudarstvennaya sistema obespecheniya edinstva izmereniy. Rezervuary stal'nye vertikal'nye tsilindricheskie. Metodika poverki. – Vved. 2002–01–01. – M.: IPK Izd-vo standartov, 2001. – III, 66 s.
6. GOST 8.346-2000. Mezhgosudarstvennyy standart. Gosudarstvennaya sistema obespecheniya edinstva izmereniy. Rezervuary stal'nye gorizontal'nye tsilindricheskie. Metodika poverki. – Vved. 2002–01–01. – M.: IPK Izd-vo standartov, 2001. – III, 53 s.
7. GOST 17032-2010. Rezervuary stal'nye gorizontal'nye dlya nefteproduktov. Tekhnicheskie usloviya. – Vved. 2012–01–01. – M.: Standartinform, 2011. – III, 12 s.
8. GOST 34100.3-2017. Mezhgosudarstvennyy standart. Neopredelennost' izmereniya. Chast' 3. – Vved. 2018–09–01. – M.: Standartinform, 2018. – VII, 105 s.
9. GOST R 8.994-2020. Natsional'nyy standart Rossiyskoy Federatsii. Gosudarstvennaya sistema obespecheniya edinstva izmereniy. Rezervuary stal'nye gorizontal'nye tsilindricheskie. Metodika kalibrovki elektronno-opticheskim metodom. – Vved. 2021–01–01. – M.: Standartinform, 2020. – IV, 70 s.
10. Rekomendatsii po metrologii R 50.2.028-2003. Algoritmy postroeniya graduirovochnykh kharakteristik sredstv izmereniy sostava veshchestv i materialov i otsenivanie ikh pogreshnostey (neopredelennostey). – Vved. 2004–01–01. – M.: IPK Izd-vo standartov, 2003. – III, 8 s.
11. Sistemy izmeritel'nye dlya rezervuarov Tankvision. Tekhnicheskoe opisanie i rukovodstvo po ekspluatatsii. – URL: https://all-pribors.ru/docs/mp_67818-17.pdf
12. Safonov A.V. Lokal'nye poverochnye skhemy dlya sredstv izmereniy kolichestva i kachestva szhizhennogo prirodnogo gaza // Avtomatizatsiya, telemekhanizatsiya i svyaz' v neftyanoy promyshlennosti. – 2021. – № 6(575). – S. 38–44. – DOI: 10.33285/0132-2222-2021-6(575)-38-44
13. K voprosu o tochnosti metodik izmereniya vmestimosti rezervuarov / I.G. Mulenko, O.V. Puchka, V.V. Ryabko, E.O. Puchka // Kompetentnost'. – 2022. – № 5. – S. 28–36. – DOI: 10.24412/1993-8780-2022-5-28-36
14. Mulenko I.G., Puchka O.V., Ryabko V.V. Kak sootvetstvovat' kriteriyam tochnosti? // Mir izmereniy. – 2023. – № 4. – S. 46–50.