«Onshore and offshore oil and gas well construction»

Study of tracking (rack formation) at the wellbottom

UDC: 622.24
DOI: 10.33285/0130-3872-2021-12(348)-24-28

Authors:

¹ Ural Federal University named after B.N. Yeltsin, the first President of Russia, Ekaterinburg, Russian Federation

Keywords: rack formation; tracking; roller cone drill bits; cone gear ratio; efficiency

Annotation:

Research, analysis and identification of the reasons for the decline of bits performance in case of occurrence of such common and undesirable phenomenon as tracking (rack formation) at the wellbottom is an important aspect of studying the effectiveness of rock destruction by roller cone bits. Factors affecting rocks destruction efficiency at the bottom of the well have been theoretical studied. A mathematical model of roller-cone drill bits operation at the wellbottom has been created, which allows the development of new cutting structures of roller-cone drill bits, capable of effectively destroying rocks without tracking (rack formation). The main reasons and regularities of the tracking occurrence at the bottom of the well, which reduces the efficiency of rocks destruction, have been identified, methods have been developed to prevent or minimize it. An analytical model and a calculation scheme have been developed that allow obtaining reliable information about the parameters and operating conditions of individual roller cone bits and their rolling cutter teeth row at the wellbottom.

Bibliography:

1. Porazhenie zaboya sled v sled – odna iz prichin razrusheniya tverdosplavnogo vooruzheniya sharoshek / A.N. Popov, S.P. Batalov, A.V. Torgashov [i dr.] // Tekhnologiya bureniya neftyanykh i gazovykh skvazhin: mezhvuz. sb. – Ufa: Izd-vo UNI, 1990. – S. 21–26.
2. Torgashov A.V., Blinkov O.G., Moseev D.Yu. Razrabotki v oblasti upravleniya kachestvom izgotovleniya sharoshechnykh dolot povyshennoy rabotosposobnosti. – Samara: Samarskiy nauch. tsentr RAN, 2000. – 69 s.
3. Olovyannyy A.G. Mekhanika gornykh porod. Modelirovanie razrusheniy. – SPb.: Kosta, 2012. – 280 s.
4. Ob isklyuchenii reykoobrazovaniya / A.V. Torgashov, Yu.G. Mikhaylin [i dr.] // Neft. prom-st'. Ser.: Neftegazovaya geologiya, geofizika i burenie. – 1984. – № 9. – S. 42–44.
5. Bikbulatov I.K., Blinkov O.G., Torgashov A.V. Opredelenie dinamicheskikh nagruzok na tverdosplavnye zubki sharoshek burovykh dolot // Problemy mashinostroeniya i avtomatizatsii. – 2000. – № 2. – S. 51–54.
6. Blinkov O.G. Povyshenie effektivnosti burovykh rabot na primere primeneniya burovykh sharoshechnykh dolot s frezerovannym vooruzheniem // Stroitel'stvo neftyanykh i gazovykh skvazhin na sushe i na more. – 2007. – № 4. – S. 26–27.
7. Eksperimental'noe obespechenie matematicheskikh metodov opredeleniya ravnomernosti nagruzheniya vooruzheniya i opor burovykh sharoshechnykh dolot / O.G. Blinkov, I.K. Bikbulatov, A.N. Popov, B.N. Trushkin // Stroitel'stvo neftyanykh i gazovykh skvazhin na sushe i na more. – 2007. – № 7. – S. 17–20.
8. Spiridonov S.V., Serikov D.Yu. Metodika opredeleniya geometricheskikh parametrov vooruzheniya burovogo instrumenta na osnove matematicheskogo modelirovaniya // Oborudovanie i tekhnologii dlya neftegazovogo kompleksa. – 2014. – № 6. – S. 29–33.
9. Serikov D.Yu., Vasil'ev A.A. Analiz konstruktivnykh osobennostey sistem promyvki sharoshechnykh burovykh dolot i ikh vliyaniya na kachestvo ochistki zaboya skvazhiny // Oborudovanie i tekhnologii dlya neftegazovogo kompleksa. – 2015. – № 3. – S. 27–32.
10. Shigin A.O. Sposoby povysheniya resursa sharoshechnykh dolot pri burenii slozhnostrukturnykh gornykh massivov // Gornyy inform.-analit. byul. (nauch.-tekhn. zhurn.). – 2015. – № 11. – S. 131–136.
11. Serikov D.Yu., Pikanov K.A. Metodika opredeleniya polozheniya mgnovennoy osi vrashcheniya sharoshki buril'nogo instrumenta // Stroitel'stvo neftyanykh i gazovykh skvazhin na sushe i na more. – 2014. – № 5. – S. 20–22.
12. Bogomolov R.M., Serikov D.Yu. Sovershenstvovanie vooruzheniya sharoshechnogo burovogo dolota // Oborudovanie i tekhnologii dlya neftegazovogo kompleksa. – 2018. – № 5. – S. 24–28. – DOI: 10.30713/1999-6934-2018-5-24-28
13. Loading of bearing retaining pin of tricone drill bit / D.I. Simisinov, A.I. Afanasiev, V.S. Shestakov, N.G. Valiev // Gornyi Zhurnal. – 2020. – No 12. – P. 64–66. – DOI: 10.17580/gzh.2020.12.14
14. Blinkov O.G., Anisimova S.E., Serikov D.Yu. Osobennosti razvitiya innovatsionnoy deyatel'nosti na predpriyatiyakh neftegazovogo mashinostroeniya // Oborudovanie i tekhnologii dlya neftegazovogo kompleksa. – 2019. – № 6(114). – S. 5–8. – DOI: 10.33285/1999-6934-2019-6(114)-5-8
15. Problemy vybora metodov modernizatsii promyshlennykh predpriyatiy / A.A. Maniraki, D.Yu. Serikov, R.F. Gaffanov, U.S. Serikova // Oborudovanie i tekhnologii dlya neftegazovogo kompleksa. – 2019. – № 1(109). – S. 28–33. – DOI: 10.33285/1999-6934-2019-1(109)-28-33