Methodological aspects of assessment of a cement stone useful life for wells using steam cycle stimulation in a productive formation
UDC: 625.24
DOI: 10.33285/0130-3872-2022-8(356)-29-35
Authors:
AGZAMOV FARIT A.
1,
KARIMOV ILSHAT N.2,
BELYAEVA EVGENIA V.2,
OKROMELIDZE GENNADY V.3
1 Ufa State Petroleum Technical University, Ufa, Russia
2 Cement Technologies, Sterlitamak, Russia
3 Perm State National Research University, Perm, Russia
Keywords: high-viscous oils, steam cycling exposure, cement stone, thermal corrosion, testing methods
Annotation:
The article discusses the methodological aspects of testing cement stone for wells using steam cycling in the development of high-viscous oil and bitumen. The change in the composition of the cement stone hardening products at various stages of thermal exposure is considered, rational time intervals of each stage are substantiated. The limitation of the use of ultrasonic control methods for testing the cement stone strength during its thermal cycling is shown.
Bibliography:
1. Perspektivy razvitiya tekhnologii stroitel'stva skvazhin dlya dobychi sverkhvyazkikh neftey i prirodnykh bitumov / N.G. Ibragimov, F.F. Akhmadishin, R.R. Ibatullin [i dr.] // Neft. khoz-vo. – 2013. – № 7. – S. 52–53.
2. Antoniadi D.G., Bekukh I.I., Garushev A.R. Proektirovanie i stroitel'stvo skvazhin dlya termicheskikh metodov dobychi nefti. – M.: Nedra, 1996. – 112 s.
3. Batler R.M. Gorizontal'nye skvazhiny dlya dobychi nefti, gaza i bitumov / per. s angl. A.A. Kozina, pod red. M.N. Kravchenko. – M.; Izhevsk: Regulyarnaya i khaoticheskaya dinamika; In-t komp'yuternykh issled., 2010. – 535 s.
4. Makar J., Luke K. Thermal Stability of the Cement Sheath in Steam Treated Oil Wells // J. of the American Ceramic Society. – 2011. – Vol. 94, Issue 12. – P. 4463–4470. – DOI: 10.1111/J.1551-2916.2011.04724.X
5. Agzamov F.A., Karimov I.N., Myazhitov R.S. Teoreticheskie osnovy i praktika polucheniya tamponazhnykh materialov dlya krepleniya paronagnetatel'nykh skvazhin // Territoriya Neftegaz. – 2016. – № 9. – S. 26–33.
6. Makar J., Luke K. Impact of Steam Treatment on the Microstructure and Chemistry of Cured Oil Well Cements // 13th Int. Congress on the Chemistry of Cement, Madrid, Spain, July 03. – 2011.
7. Rukovodstvo po elektrotermoobrabotke betona. – M.: Stroyizdat, 1974. – 257 s.
8. Uelch D.G., Midzhili Kh.G., Teylor Kh.F.U. Khimiya tsementov / pod red. Kh.F.U. Teylora; sokr. per. s angl. pod red. Yu.M. Butta, S.A. Krzheminskogo. – M.: Stroyizdat, 1969. – 501 s.
9. Danyushevskiy V.S. Proektirovanie optimal'nykh sostavov tamponazhnykh tsementov. – M.: Nedra, 1978. – 293 s.
10. Agzamov F.A., Belousov A.O. Kompleksnyy podkhod k preduprezhdeniyu narusheniya germetichnosti zatrubnogo prostranstva skvazhin pri vtorichnom vskrytii i GRP // Neftyanaya provintsiya. – 2019. – № 1(17). – S. 197–214. – DOI: 10.25689/NP.2019.1.197-214
11. Danyushevskiy V.S., Aliev R.M., Tolstykh I.F. Spravochnoe rukovodstvo po tamponazhnym materialam. – 2-e izd., pererab. i dop. – M.: Nedra, 1987. – 373 s.
12. Innovative Cementing Solution for Long-term Steam Injection Well Integrity / G. DeBruijn, A. Loiseau, A. Chougnet-Slrapian [et al.] // SPE EUROPEC/EAGE Annual Conf. and Exhibition, Barcelona, Spain, June 14–17. – 2010. – DOI: 10.2118/131324-MS
13. Kravtsova A.A. Silikatnye stenovye materialy na osnove otkhodov sodovogo proizvodstva i domennykh shlakov: dis. … kand. tekhn. nauk: 05.23.05. – Ufa, 1980. – 208 s.
14. Designing and Testing Cement System for SAGD Application / R. Patil, A. Garnier, G. Galdiolo [et al.] // SPE Annual Technical Conf. and Exhibition, Florence, Italy, Sept. 19–22. – 2010. – DOI: 10.2118/134169-MS
15. Performance Characterization and Optimization of Cement Systems for Thermally Stimulated Wells / M.A. Chartier, S. Thompson, M. Bordieanu [et al.] // SPE Canada Heavy Oil Technical Conf., Calgary, Alberta, Canada, June 9–11. – 2015. – DOI: 10.2118/174493-MS
Back to issue