«Equipment and technologies for oil and gas complex»

Some specific features of the parametric normalization method implementation in the system of technical regulation of construction and operation of fuel and energy complex facilities

UDC: 006.011
DOI: -

Authors:

¹ Federal Autonomous Institution "Federal Center for Standardization", Moscow, Russia
² UC 13 "Design and Construction of Main and Field Pipelines, Oil and Gas Storage Facilities", TC 465 "Construction", Moscow, Russia
³ VNIIST - Engineering Oil and Gas Company, Moscow, Russia
⁴ National University of Oil and Gas "Gubkin University", Moscow, Russia
⁵ Russian Union of Oil and Gas Constructors, Moscow, Russia
⁶ Immanuel Kant Baltic Federal University, Kaliningrad, Russia

Keywords: standardization, regulatory base, technical regulation, insurance, compliance provision, target method, parametric method, prescriptive method

Annotation:

The authors of the article consider some specific features of the transition of the current regulatory base from a prescriptive method to a parametric one in the Russian Federation. The possibility of the parametric method usage within the existing system of technical regulation is analyzed. Foreign experience of parametry use as a method of technical regulation is assessed. Some approaches to the standardization system reorganization are proposed and critical points of the process and tasks requiring priority solutions are identified. The possibility of the target standardization method usage is being considered as an intermediate stage in the reorganization of the system, taking into account the practices that have been developed in the country for updating the regulatory base. The convenience and effectiveness of prescriptive, target and parametric methods application are compared. The most balanced steps are proposed that allow the standardization system transition from a prescriptive method to a target one and then to a parametric standardization method with the participation of all interested parties. The problems of the parametric standardization method application in conditions of the established fuel and energy complex of Russia are considered.

Bibliography:

1. Problematika razrabotki modifitsirovannykh standartov na ob"ekty neftegazovogo kompleksa / A.S. Panteleev, T.A. Guseva, D.V. Kodash, T.S. Kaplya // Oborudovanie i tekhnologii dlya neftegazovogo kompleksa. – 2019. – № 4(112). – S. 40–47. – DOI: 10.33285/1999-6934-2019-4(112)-40-47
2. Raykhert K.V. O sootnoshenii ponyatiy "parametricheskaya obshchaya teoriya sistem", "sistemno-parametricheskaya metodologiya" i "sistemno-parametricheskiy metod" // Sb. nauch. tr. SWorld. – 2014. – T. 20, № 2. – S. 12–21.
3. Ob utverzhdenii Strategii razvitiya stroitel'noy otrasli i zhilishchno-kommunal'nogo khozyaystva Rossiyskoy Federatsii na period do 2030 goda s prognozom do 2035 goda: rasporyazhenie Pravitel'stva RF ot 31.10.2022 № 3268-r (red. ot 29.11.2023).
4. Turkina M.Yu. Osobennosti razvitiya standartizatsii na territorii SSSR i Rossiyskoy Federatsii // Gos. i munitsip. upravlenie v XXI veke: teoriya, metodologiya, praktika. – 2012. – № 4. – S. 44–51.
5. Pushkarev V.A., Klestov S.A., Syryamkin V.I. Praktika vzaimodeystviya mezhdunarodnoy organizatsii po standartizatsii i natsional'noy sistemy standartizatsii RF // Innovatika-2019: sb. materialov XV Mezhdunar. shk.-konf. studentov, aspirantov i molodykh uchenykh, Tomsk, 25–27 apr. 2019 g. – Tomsk: STT, 2019. – S. 313–317.
6. Nikolenko K.S., Absimetov V.E. Preimushchestva i nedostatki parametricheskogo i tselevogo metodov normirovaniya konstruktivnykh resheniy stroitel'nykh konstruktsiy // Nauka i innovatsii v stroitel'stve: sb. dokl. VI Mezhdunar. nauch.-prakt. konf., posvyashchennoy 50-letiyu kafedry str-va i gorodskogo khoz-va, Belgorod, 14 apr. 2021 g.: v 2 t. T. 2. – Belgorod: Belgorodskiy gos. tekhnolog. un-t im. V.G. Shukhova, 2022. – S. 31–34.
7. Mingxuan Wang, Tianyi Liu, Yanhua Li. Empirical analysis of economic growth promotion through standardization through technological innovation pathway // PCCNT '23: Proceedings of the 2023 Int. Conf. on Power, Communication, Computing and Networking Technologies, Wuhan, China, Sept. 24–25, 2023. – New York, NY, United States: Association for Computing Machinery, 2024. – Article No. 24. – DOI: 10.1145/3630138.3630438
8. O vnesenii izmeneniy v Federal'nyy zakon "Tekhnicheskiy reglament o bezopasnosti zdaniy i sooruzheniy": Feder. zakon ot 25.12.2023 № 653-FZ.
9. Hollberg A. A parametric method for building design optimization based on Life Cycle Assessment: thesis to obtain the degree of Doctor-engineer. – Weimar, 2016. – XX, 240 p.
10. Kolubkov A.N. Parametricheskiy metod normirovaniya. Postoyannoe stremlenie k izmeneniyam // AVOK: Ventilyatsiya, otoplenie, konditsionirovanie vozdukha, teplosnabzhenie i stroitel'naya teplofizika. – 2023. – № 8. – S. 12–21.
11. Shalaev A.P., Vel'mozhina E.S., Kalashnikova M.A. Programma natsional'noy standartizatsii kak klyuchevoy instrument kratko- i srednesrochnogo planirovaniya rabot po standartizatsii // Standarty i kachestvo. – 2020. – № 12. – S. 10–15.
12. Ob utverzhdenii Metodiki po primeneniyu parametrizovannykh norm, rastsenok i material'nykh resursov pri razrabotke proektno-smetnoy dokumentatsii s ispol'zovaniem tekhnologiy informatsionnogo modelirovaniya: prikaz Komiteta g. Moskvy po tsenovoy politike v str-ve i gos. ekspertize proektov ot 13.04.2023 № MKE-OD/23-46.
13. Kretov D.A., Butovka M.N. Analiz zavisimosti nauchno-issledovatel'skikh tsentrov ot finansirovaniya so storony neftegazovykh kompaniy // Truboprovodnyy transport: teoriya i praktika. – 2023. – № 5(87). – S. 24–28.
14. Vasil'ev G.G., Ivanets V.K., Kazantseva D.A. Printsipy modelirovaniya protsessa realizatsii proektov stroitel'stva ob"ektov truboprovodnogo transporta // Avtomatizatsiya i informatizatsiya TEK. – 2022. – № 1(582). – S. 37–43. – DOI: 10.33285/2782-604X-2022-1(582)-37-43
15. O tekhnicheskom regulirovanii: Feder. zakon ot 27.12.2002 № 184-FZ.
16. Kershenbaum V.Ya., Guseva T.A., Panteleev A.S. Problematika importozameshcheniya s pozitsiy konkurentosposobnosti oborudovaniya neftegazovogo kompleksa // Oborudovanie i tekhnologii dlya neftegazovogo kompleksa. – 2018. – № 2. – S. 8–16. – DOI: 10.30713/1999-6934-2018-2-8-16