Experimental study of hydrodynamic parameters of a mass-exchange plate made of cut-and-pulled steel sheet of various designs
UDC: 532.5:66.048.48+621.9
DOI: -
Authors:
SVIRIDOV D.V.
1,
LARKIN A.V.2,
FEDOROVA E.B.1,
PIVOVARCHUK B.V.1
1 National University of Oil and Gas "Gubkin University", Moscow, Russia
2 Ryazan Oil Refining Company, Ryazan, Russia
Keywords: sieve mass exchangers, cut-and-pull sheet, rolled plate, unrolled plate, velocity factor, hydrodynamics
Annotation:
The study of hydrodynamic characteristics of sieve mass-exchange contact devices used in the oil and gas industry has been carried out using an experimental bench capable of modeling the "air – water" system. As part of the study, graphs were built to illustrate the dependence of the plate hydraulic resistance and 10 % slump on the liquid and gas load. These experimental data provided information about the processes occurring in the contact devices under different operational modes. The experimental results gave an opportunity to evaluate the effectiveness of sieve mass transfer devices in the oil and gas industry. The study revealed the peculiarities of liquid-gas interaction in these devices, which can play a key role in the technological processes optimization. The proposed methodology of determining these devices operational modes is based on the analysis of the experimental data obtained. Further research can be aimed at expanding the scope of sieve mass-exchange devices use and improving their technical characteristics.
Bibliography:
1. Nurtashova M., Masakbaeva S. Uvelichenie effektivnosti massoobmennykh protsessov neftepererabatyvayushchikh proizvodstv // Deutsche Internationale Zeitschrift für Zeitgenössische Wissenschaft. – 2021. – № 10-1. – S. 11–13. – DOI: 10.24412/2701-8369-2021-10-1-11-13
2. Arabov M.Sh., Arabov S.M. Energoeffektivnost' tekhnologicheskikh protsessov na Astrakhanskom gazopererabatyvayushchem zavode // Oborudovanie i tekhnologii dlya neftegazovogo kompleksa. – 2023. – № 3(135). – S. 10–19. – DOI: 10.33285/1999-6934-2023-3(135)-10-19
3. Kanafeeva D.I., Yasashin V.A., Radaev G.V. Analiz putey povysheniya effektivnosti oborudovaniya neftepererabotki // Oborudovanie i tekhnologii dlya neftegazovogo kompleksa. – 2020. – № 3(117). – S. 52–55. – DOI: 10.33285/1999-6934-2020-3(117)-52-55
4. Shavaleev R.R., Elizarov D.V., Elizarov V.V. Modelirovanie massoperenosa pri rektifikatsii vodno-glikolevoy smesi v tarel'chato-nasadochnom apparate // Vestn. Tekhnolog. un-ta. – 2019. – T. 22, № 4. – S. 158–162.
5. Ul'yanov B.A., Fereferov M.Yu., Khortov A.V. Gidravlicheskoe soprotivlenie kombinirovannoy dvukhpotochnoy sitchatoy tarelki s podvizhnoy sharovoy nasadkoy // Sb. nauch. tr. Angarskogo gos. tekhn. un-ta. – 2020. – T. 1, № 17. – S. 104–108. – DOI: 10.36629/2686-7788-2020-1-104-108
6. Rakhmonov T.Z. Issledovanie gidrodinamiki massoobmennykh tarelok kolonnykh apparatov ustanovok dlya ochistki prirodnogo gaza // Bulatovskie chteniya. – 2018. – T. 6. – S. 79–84.
7. Li Shuai, Davidson L., Peng Shia-Hui. A fluid flow model for the pressure loss through perforated plates. – 2023. – 15 p. – DOI: 10.48550/arXiv.2304.11730
8. Lar'kin A.V. Issledovanie gidrodinamiki i massoperedachi na pryamotochnoy klapanno-sitchatoy tarelke novoy konstruktsii: dis. … kand. tekhn. nauk: 05.02.13. – M., 2014. – 164 s.
Back to issue