Scientific and technical journal

«Oilfield engineering»

ISSN 0207-2351

Oilfield engineering
РОССИЙСКИЙ РЕАГЕНТ РБС-3 ДЛЯ РАЗРУШЕНИЯ ФИЛЬТРАЦИОННОЙ КОРКИ БУРОВОГО РАСТВОРА В ПРИЗАБОЙНОЙ ЗОНЕ ПРОДУКТИВНЫХ ПЛАСТОВ НА СКВАЖИНАХ КАСПИЙСКОГО ШЕЛЬФА

UDC: 622.24.063(262.81)
DOI: 10.33285/0207-2351-2021-11(635)-20-25

Authors:

ANDREEV KONSTANTIN VLADIMIROVICH1,
SHADCHNEV ROMAN ALEKSANDROVICH1,
BUTAKOVA NATALIA ALEKSANDROVNA1,
KRIVOSHEEVA NATALIA NIKOLAEVNA1,
BUNIN DENIS YURIEVICH1,
MAVRIN ALEXANDER MIKHAILOVICH2,
MERKURIEVA ANASTASIYA GENNADIEVNA2

1 LUKOIL-Engineering Limited PermNIPIneft Branch Office in Perm, Volgograd, Russian Federation
2 LUKOIL-Engineering LLC, Moscow, Russian Federation

Keywords: North Caspian, offshore field, oil-based mud MEGADRIL, filter cake, barite, RBS-3 reagent, chelates, drilling mud displacement technology, bottom-hole area, permeability recovery factor

Annotation:

The North Caspian fields, developed by horizontal wells, face the problem of colmatation of bottom-hole zones of production formations by MEGADRIL mud filter oil-based cake, containing deposits of barite (barium sulfate), the solution requires improvement of mud displacement technology. RBS-3 reagent (produced by LLC Multifunctional Company "ChemServiceEngineering") is proposed for a formation bottom-hole zone cleaning as a result of barite dissolvation and filter cake removal. RBS-3 reagent function is based on transformation of insoluble barium salts into chelates which are easy to remove from bottom-hole area. Detergents in RBS-3 formulation promote mud filter cake dispergation. Results of laboratory core-level formation damage tests of RBS-3 mud filter cake removal efficiency are presented in the paper as well as rheological tests of thickened RBS-3 and NaCl solutions. Optimal ratio of DuoVis and FloTrol thickening components is established. Drilling mud displacement procedure with the use of RBS-3 reagent was first developed and first tested for North Caspian well.

Bibliography:

1. Жизненный цикл реализации морских проектов ПАО "ЛУКОЙЛ" на примере многолетнего опыта строительства и эксплуатации объектов нефтегазодобычи на Северном Каспии / В.Ю. Алекперов, Р.У. Маганов, Н.Н. Ляшко [и др.] // Строительство нефтяных и газовых скважин на суше и на море. - 2018. - № 1. - С. 24-32.
2. Гавура А.В., Шафиков Р.Р., Разуменко В.Е. Особенности разработки морских месторождений ПАО "ЛУКОЙЛ" // Нефть. Газ. Новации. - 2020. - № 10. - С. 70-77.
3. Description and Regulation of Drilling Completion Fluid Cake Structure / Xue Liu [et al.] // Open J. of Yangtze Gas and Oil. - 2018. - Vol. 3, № 4. - P. 293-308.
4. Соколов Н.А., Ларин С.Н. Перспективы развития нефтегазового сектора российской экономики в условиях реализации программ импортозамещения // Бюллетень науки и практики. - 2018. - Т. 4, № 1. - С. 191-206. - URL: http://www.bulletennauki.com/sokolov-na
5. Технология интенсификации добычи нефти путем глубокой очистки призабойной зоны скважин реагентами РБС-3 и ДГК-2 / Р.Н. Фахретдинов, Д.Ф. Селимов, А.А. Фаткуллин [и др.] // Нефт. хоз-во. - 2020. - № 7. - С. 116-119.
6. Пат. 2581859 Рос. Федерация, МПК С09К 8/528. Состав для обработки призабойной зоны пласта / Р.Н. Фахретдинов; заявитель ООО МПК "ХимСервисИнжиниринг". - № 2015107903/03; заявл. 10.03.2015; опубл. 20.04.2016, Бюл. № 11.
7. Новые составы брейкерных композиций контролируемого действия в условиях высоких температур / А.В. Курдюков, В.И. Ноздря, А.Ю. Царьков [и др.] // Бурение и нефть. - 2019. - № 5. - С. 50-55.
8. Chelating Agent for Uniform Filter Cake Removal in Horizontal and Multilateral Wells: Laboratory Analysis and Formation Damage Diagnosis / H. Al-Ibrahim, T. AlMubarak, M. AlMubarak [et al.] // Paper SPE SPE-177982-MS. - 2015. - URL: DOI: 10.2118/177982-MS
9. Особенности проведения петрофизических исследований с использованием искусственной пористой среды / Д.Ю. Бунин, Н.А. Бутакова, В.Н. Лебедев, А.Н. Степанов // ГеоЕвразия-2018. Современные методы изучения и освоения недр Евразии: Тр. Междунар. геолого-геофизической конф. (Москва, 5-8 февраля, 2018). - Тверь: ООО "ПолиПРЕСС", 2018. - С. 463-467.