«Oilfield engineering»

Features of forecasting the need of spare parts for oil-field equipment

UDC: 658.58
DOI: 10.33285/0207-2351-2022-6(642)-53-59

Authors:

¹ Azerbaijan State Oil and Industry University, Baku, Azerbaijan
² Baku Oilfield Equipment Plant, Baku, Azerbaijan

Keywords: range of spare parts, drilling and oilfield equipment, need for spare parts, modernization of structures

Annotation:

The article is devoted to the problem of forecasting the need for spare parts, taking into account the conditions and features of drilling and oilfield installations operation. Based on the reliability laws theory, a technique is presented that takes into account the relationship between the resource of the equipment component parts and the distribution parameters of individual elements. The expediency of applying a unified law of probabilities distribution of the operational life-time of elements failure-free operation is substantiated.

The optimal range and number of spare parts are determined on the basis of ensuring their sufficiency, which excludes of mobile equipment downtime at the points of operation due because of the lack of the appropriate spare parts.

The developed technique makes it possible to evaluate the achieved level of reliability by reducing the ratio τv /Т as a result of improving the structural components with subsequent analysis and comparison of the ratio τv /Т with the data on the most advanced components to identify the overall effect and feasibility of structures further modernization.

Bibliography:

1. Khazov B.F. Nadezhnost' stroitel'nykh i dorozhnykh mashin. – M.: Mashinostroenie, 1979. – 192 s.

2. Avdon'kin F.N. Teoreticheskie osnovy tekhnicheskoy ekspluatatsii avtomobiley. – M.: Transport, 1985. – 215 s.

3. Ivashchenko N.I. Tekhnologiya remonta avtomobiley. – Kiev: Vishcha shkola, 1977. – 360 s.

4. Nadezhnost' stroitel'nykh mashin / G.P. Grinevich, E.A. Kamenskaya, A.K. Alferov [i dr.]. – M.: Stroyizdat, 1975. – 296 s.

5. Tekhnicheskaya ekspluatatsiya aviatsionnogo oborudovaniya / V.G. Vorob'ev, V.D. Konstantinov, V.G. Denisov [i dr.]. – M.: Transport, 1990. – 296 s.

6. Chervonyy A.A., Luk'yashchenko V.I., Kotin L.V. Nadezhnost' slozhnykh sistem. – M.: Mashinostroenie, 1976. – 288 s.

7. Trukhanov V.M. Nadezhnost' tekhnicheskikh sistem tipa podvizhnykh ustanovok na etape proektirovaniya i ispytaniya opytnykh obraztsov. – M.: Mashinostroenie, 2003. – 320 s.

8. Khazov B.F., Didusev B.A. Spravochnik po raschetu nadezhnosti mashin na stadii proektirovaniya. – M.: Mashinostroenie, 1986. – 224 s.

9. Yugovich 3., Papich J.I. Opredelenie chisla zapasnykh chastey sistemy na osnovanii metoda raspredeleniya nadezhnosti elementov // Nadezhnost' i kontrol' kachestva. – 1998. – № 3. – S. 47–53.

10. Kofman A., For R. Zaymemsya issledovaniem operatsiy: per. s frants. / pod red. A.A. Korbuta. – M.: Mir, 1966. – 279 s.

11. Gertsbakh I.B., Kordonskiy Kh.B. Modeli otkazov. – M.: Sovetskoe radio, 1966. – 166 s.

12. Fokin Yu.G. Nadezhnost' pri ekspluatatsii tekhnicheskikh sredstv. – M.: Voenizdat, 1970. – 224 s.

13. Babaev S.G., Shakhbazov Ya.G. Planovo-predupreditel'nyy remont i tekhnicheskoe obsluzhivanie burovogo oborudovaniya // Obz. inf. Ser. KhM-3 Neftepromyslovoe mashinostroenie. – M.: TsINTIkhimneftemash, 1973. – 62 s.

14. Babaev S.G., Shakhbazov Ya.G. O metodike opredeleniya potrebnosti narodnogo khozyaystva v zapasnykh chastyakh k neftepromyslovomu oborudovaniyu // Za tekhnicheskiy progress. – 1974. – № 5. – S. 25–26.

15. Radzhabov N.A., Mamedov E.A. Opredelenie progressivnoy normy raskhoda i potrebnosti v zapchastyakh k neftepromyslovomu oborudovaniyu // Azerbaydzhanskoe neft. khoz-vo. – 1983. – № 11. – S. 58–64.

16. Shakhbazov Ya.G., Babaev S.G., Sedov V.A. O differentsirovannykh srokakh sluzhby bystroiznashivayushchikhsya detaley gidravlicheskoy chasti burovykh nasosov // Azerbaydzhanskoe neft. khoz-vo. – 1970. – № 4. – S. 43–44.

17. Babaev S.G., Kadirov A.D., Abdurakhmanov F.G. Prognozirovanie potrebnosti v zapasnykh chastyakh dlya tekushchikh remontov neftepromyslovogo oborudovaniya. – Baku: Izd-vo AGNA, 2006. – 76 s.

18. Gnedenko B.V., Belyaev Yu.K., Solov'ev A.D. Matematicheskie metody v teorii nadezhnosti. – M.: Nauka, 1965. – 524 s.

19. Babaev S.G., Kershenbaum V.Ya., Gabibov I.A. Evolyutsiya nadezhnosti v kompleksakh "kachestvo–konkurentosposobnost'" neftepromyslovogo oborudovaniya. – M.–Baku: NING, 2020. – 416 s.

20. Babaev S.G., Vasil'ev Yu.A. Povyshenie nadezhnosti oborudovaniya, primenyaemogo dlya bureniya na neft' i gaz. – M.: Mashinostroenie, 1972. – 162 s.

21. Metodicheskie ukazaniya po opredeleniyu resursa detaley / pod red. S.I. Kostenko. – M.: GOSNITI, 1977. – 103 s.

22. Piskunov N.S. Differentsial'noe i integral'noe ischisleniya. V 2-kh t. T. 2. – M.: Integral-Press, 2005. – 544 s.

23. Babaev S.G., Gabibov I.A., Feyziev I.A. Evolyutsiya mobil'nykh neftepromyslovykh pod"emnykh ustanovok i puti povysheniya ikh konkurentosposobnosti // Oborudovanie i tekhnologii dlya neftegazovogo kompleksa. – 2019. – № 4(112). – S. 34–39. – DOI: 10.33285/1999-6934-2019-4(112)-34-39

24. Babaev S.G., Shakhbazov E.K. Issledovanie ekspluatatsionnykh pokazateley nadezhnosti pod"emnykh ustanovok dlya tekushchego i kapital'nogo remonta skvazhin // Obz. informatsiya. Ser. KhM-3 Neftepromyslovoe mashinostroenie. – M.: TsINTIkhimneftemash, 1982. – 22 s.

25. Babaev S.G., Gabibov I.A., Melikov R.Kh. Osnovy teorii nadezhnosti neftepromyslovogo oborudovaniya. – Baku: Izd-vo AGNA, 2015.– 400 s.