«Environmental protection in oil and gas complex»

Improvement of occupational safety during the current and major repairs of oil and gas condensate wells with the use of integrated personal protective equipment in PJSC "Gazprom neft"

UDC: 622.864
DOI: 10.33285/2411-7013-2022-2(305)-41-48

Authors:

¹ Ufa State Petroleum Technical University, Ufa, Russian Federation

Keywords: occupational safety, injuries, accident, well repair, personal protective equipment, cardiovascular diseases, monitoring

Annotation:

The article describes the features of the current and capital repairs of wells. The prerequisites necessary for the work safe conducting are indicated. Dangerous and harmful production factors during wells repair are considered. The causes of injuries and accidents during the current and major repairs of oil and gas condensate wells are analyzed on the example of PJSC "Gazprom Neft". The problem of cardiovascular pathologies associated with arterial hypertension and possible consequences of untimely diagnosis and treatment are touched upon. The principle of operation of the "Smart Helmet" complex and its main advantages are described. The design and functional affiliation of all elements of the protective helmet are considered in detail. The modernization of the design of the protective helmet carrier belt for the installation of a pressure and heart rate monitoring sensor in the temporal region of the employee's head is proposed. The scheme of the internal equipment before and after modernization is shown. The advantages that can be achieved through the use of the upgraded "Smart Helmet" complex are indicated.

Bibliography:

1. Yushin E.S. Tekhnika i tekhnologiya tekushchego i kapital'nogo remonta neftyanykh i gazovykh skvazhin na sushe i na more: ucheb. posobie. – Ukhta: UGTU, 2019. – 292 s.
2. Karvanov R.A., Nizamova G.I. Sovershenstvovanie sistemy upravleniya bezopasnost'yu truda pri proizvodstve tekushchego i kapital'nogo remonta skvazhin s primeneniem integrirovannykh intellektual'nykh sredstv individual'noy zashchity // Aktual'nye problemy nauki i tekhniki – 2021: sb. materialov XIV Mezhdunar. nauchn.-prakt. konf. molodykh uchenykh. – Ufa: Ufimskiy GNTU, 2021. – T. 2. – S. 126–127.
3. Ergonomics of the workplace in the lean production system / N.V. Vadulina, N.Kh. Abdrahmanov, A.V. Fedosov [et al.] // MIP: Engineering-2020: Modernization, Innovations, Progress: Advanced Technologies in Material Science, Mechanical and Automation Engineering: II Int. Conf., Krasnoyarsk, Apr. 16–18. – Institute of Physics and IOP Publishing Limited, 2020. – P. 42040. – DOI: 10.1088/1757-899X/862/4/042040
4. Godovoy otchet za 2020 g. / PAO "Gazprom neft'". – URL: https://ar2020.gazprom-neft.ru/ (data obrashcheniya 11.01.2022).
5. Vadulina N.V., Gallyamov M.A., Devyatova S.M. Professional'naya zabolevaemost' v Rossii: problemy i resheniya // Bezopasnost' tekhnogennykh i prirodnykh sistem. – 2020. – № 3. – S. 7–15. – DOI: 10.23947/2541-9129-2020-3-7-15
6. Vyyavlenie i profilaktika khronicheskikh zabolevaniy pri vypolnenii trudovykh obyazannostey / N.V. Vadulina, N.Kh. Abdrakhmanov, K.V. Mukhametova [i dr.] // Bezopasnost' zhiznedeyatel'nosti. – 2021. – № 7(247). – S. 3–11.
7. Programma po profilaktike serdechno-sosudistykh zabolevaniy v PAO "Gazprom neft'". – URL: https://zakupki.gazprom-neft.ru/upload/medialibrary/doc18032020/Программа%20по%20профилактике%20сердечно%20–%20сосудистых%20заболеваний.docx (data obrashcheniya: 11.01.2022).
8. Razrabotka meropriyatiy po uluchsheniyu usloviy truda na proizvodstve polietilena v PAO "Ufaorgsintez" / A.V. Fedosov, N.V. Vadulina, N.Kh. Abdrakhmanov [i dr.] // Bezopasnost' truda v promyshlennosti. – 2020. – № 6. – S. 84–88. – DOI: 10.24000/0409-2961-2020-6-84-88
9. Lushnikov N.D., Al'terman A.D. Bezopasnost' personala na proizvodstve za schet umnykh tekhnologiy // European Scientific Conference: sb. st. XVII Mezhdunar. nauch.-prakt. konf., Penza, 07 noyab. – Penza: Nauka i Prosveshchenie (IP Gulyaev G.Yu.), 2019. – S. 55–57.
10. Sharapova R.I., Solopova V.A. Umnaya kaska // Aktual'nye problemy geologii, geografii, tekhnosfernoy i ekologicheskoy bezopasnosti: sb. materialov XLIII studench. nauchn. konf., Orenburg, 6–13 apr. – Orenburg: IP Vostrikov K "Poliart", 2021. – S. 120–123.
11. Karvanov R.A., Nizamova G.I. Povyshenie bezopasnosti pri proizvodstve tekushchego i kapital'nogo remonta skvazhin s primeneniem integrirovannykh intellektual'nykh sredstv individual'noy zashchity // Aktual'nye problemy nauki i tekhniki – 2021: sb. materialov XIV Mezhdunar. nauchn.-prakt. konf. molodykh uchenykh. – Ufa: Ufimskiy GNTU. – 2021. – T. 2. – S. 115–116.
12. Sozdanie informatsionnoy sistemy po uchetu i analizu rezul'tatov kontrol'no-profilakticheskoy deyatel'nosti v oblasti promyshlennoy bezopasnosti, okhrany truda i okruzhayushchey sredy / M.A. Gallyamov, N.V. Vadulina., V.S. Proskura, A.O. Salimov // Elektron. nauch. zhurn. Neftegazovoe delo. – 2019. – № 2. – S. 48–64. – DOI: 10.17122/ogbus-2019-2-48-64
13. Pat. 2708896 Ros. Federatsiya, MPK A42B 3/00. Zashchitnaya kaska / S.M. Nedugov, V.I. Gabov; patentoobladatel' OAO "Suksunskiy optiko-mekhanicheskiy zavod". – № 2019107616; zayavl. 15.03.2019; opubl. 12.12.2019, Byul. № 35.